remove mold from siding.

How to Pressure Wash Vinyl Siding

How to Pressure Wash Vinyl Siding

Vinyl siding is a popular choice for homeowners due to its durability, low maintenance, and aesthetic appeal. However, over time, dirt, grime, and mold can accumulate on the surface, diminishing its appearance. Pressure washing is an effective way to restore the shine and cleanliness of vinyl siding. In this article, we will guide you through the process of pressure washing vinyl siding, ensuring that you achieve the best results while avoiding any potential damage.

1. Gather the necessary equipment

Before you begin pressure washing your vinyl siding, it is essential to gather all the necessary equipment. Here’s what you’ll need:

  • A pressure washer: Choose a pressure washer with a PSI (pounds per square inch) rating between 1,500 and 2,000. Higher PSI can damage the siding.
  • A wide-angle nozzle: Opt for a 25- or 40-degree nozzle to disperse the water evenly and prevent concentrated pressure.
  • A cleaning solution: Use a mild detergent specifically designed for pressure washing vinyl siding. Avoid using bleach or harsh chemicals as they can damage the siding.
  • A soft-bristle brush: This will come in handy for scrubbing stubborn stains or areas with heavy dirt buildup.
  • A ladder: Depending on the height of your home, you may need a ladder to reach higher areas.
  • Protective gear: Wear safety goggles, gloves, and non-slip shoes to protect yourself from debris and slippery surfaces.

2. Prepare the area

Before you start pressure washing, it is important to prepare the area to minimize any potential damage or accidents:

  • Close all windows and doors to prevent water from entering your home.
  • Remove any obstacles or fragile items near the siding that could be damaged by the pressure washer.
  • Cover plants, shrubs, and delicate landscaping with plastic sheets to protect them from the cleaning solution and high-pressure water.
  • Disconnect any electrical connections, such as outdoor lights or power outlets, to avoid accidents.

3. Apply the cleaning solution

Before you start pressure washing, it is recommended to apply a cleaning solution to the vinyl siding. This will help loosen dirt and grime, making it easier to remove. Follow these steps:

  1. Dilute the cleaning solution according to the manufacturer’s instructions.
  2. Starting from the bottom, apply the cleaning solution to a small section of the siding using a sprayer or a soft-bristle brush.
  3. Allow the cleaning solution to sit on the surface for a few minutes, but avoid letting it dry.

4. Pressure wash the vinyl siding

Now that the cleaning solution has had time to work its magic, it’s time to pressure wash the vinyl siding:

  1. Attach the wide-angle nozzle to the pressure washer.
  2. Start from the bottom and work your way up, holding the pressure washer nozzle at a 45-degree angle to the siding.
  3. Maintain a distance of at least 12 inches between the nozzle and the siding to prevent damage.
  4. Move the nozzle in a sweeping motion, overlapping each stroke to ensure even cleaning.
  5. Pay extra attention to areas with stubborn stains or heavy dirt buildup. Use the soft-bristle brush to scrub gently if necessary.
  6. Rinse the siding thoroughly, starting from the top and working your way down.

5. Safety precautions

While pressure washing vinyl siding is a relatively safe task, it is important to take some precautions to avoid accidents or damage:

  • Do not use a pressure washer while standing on a ladder. The force of the water can cause instability and lead to falls.
  • Avoid spraying water directly into gaps, such as under the siding or around windows and doors, as it can cause water damage.
  • Do not use excessive pressure or hold the nozzle too close to the siding, as it can cause dents, cracks, or water infiltration.
  • Always follow the manufacturer’s instructions for your specific pressure washer model.


Pressure washing vinyl siding is an effective way to restore its cleanliness and shine. By following the steps outlined in this article, you can achieve great results while avoiding any potential damage. Remember to gather the necessary equipment, prepare the area, apply a cleaning solution, and pressure wash the siding using the appropriate techniques. By taking the necessary safety precautions, you can ensure a successful and safe pressure washing experience. Enjoy your clean and rejuvenated vinyl siding!

Leave a Reply